Embedded TCP/IP stack  3.9.4

ColdFire specific default configuration file. More...

Detailed Description

ColdFire specific default configuration file.

This section describes parameters that are specific only for the ColdFire platform.
The user may override and change the default values in the application-specific configuration file fnet_user_config.h.

Macros

#define FNET_CFG_MCF_V1
 ColdFire V1 (Flexis): More...
 
#define FNET_CFG_MCF_TIMER_DTIM
 The DMA Timer (DTIM) module: More...
 
#define FNET_CFG_MCF_TIMER_PIT
 The Programmable Interrupt Timer (PIT) module: More...
 
#define FNET_CFG_MCF_TIMER_RTC8
 The 8-bit Real-Time Counter (RTC) module: More...
 
#define FNET_CFG_MCF_IPSBAR
 Internal Peripheral System Base Address.

NOTE: It's ignored for MCF V1.

. More...

 
#define FNET_CFG_MCF_CACHE_CACR   (0)
 Cache Control Register (CACR) default value, used during cache invalidation.
It is used only when FNET_CFG_CPU_CACHE is enabled.

. More...

 
#define FNET_CFG_MCF_RCM
 Reset Controller Module (RCM): More...
 
#define FNET_CFG_MCF_UART
 The Universal Asynchronous Receiver/Transmitters (UART) module: More...
 
#define FNET_CFG_MCF_SCI
 The Serial Communication Interface (SCI) module: More...
 

© 2005-2017 by Andrey Butok. http://fnet.sourceforge.net